Netgear XSM7224S XMS7224S CLI Manual - Page 286

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 class-map This command defines a DiffServ class of type match-all. When used without any match condition, this command enters the class-map mode. The is a case sensitive alphanumeric string from 1 to 31 characters uniquely identifying an existing DiffServ class. Note: The class-map-name 'default' is reserved and must not be used. The class type of match-all indicates all of the individual match conditions must be true for a packet to be considered a member of the class.This command may be used without specifying a class type to enter the Class-Map Config mode for an existing DiffServ class. Note: The optional keywords [{ipv4 | ipv6}] specify the Layer 3 protocol for this class. If not specified, this parameter defaults to 'ipv4'. This maintains backward compatibility for configurations defined on systems before IPv6 match items were supported. Note: The CLI mode is changed to Class-Map Config or Ipv6-Class-Map Config when this command is successfully executed depending on the [{ipv4 | ipv6}] keyword specified. Format Mode class-map match-all [{ipv4 | ipv6}] Global Config no class-map This command eliminates an existing DiffServ class. The is the name of an existing DiffServ class. (The class name 'default' is reserved and is not allowed here.) This command may be issued at any time; if the class is currently referenced by one or more policies or by any other class, the delete action fails. Format Mode no class-map Global Config Quality of Service (QoS) Commands v1.0, November 2010 5-12