Netgear XSM7224S XMS7224S CLI Manual - Page 409

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Field Sampling Rate Description The statistical sampling rate for packet sampling from this source. A sampling rate of 1 counts all packets. A value of zero (0) disables sampling. A value of N means that out of N incoming packets, 1 packet will be sampled. The range is 1024-65536 and 0. The default is 0. no sflow sampler Use this command to reset the sFlow sampler instance to the default settings. Format Mode no sflow sampler { | rate | maxheadersize } Interface Config sflow poller A data source configured to collect counter samples is called a poller. Use this command to enable a new sFlow poller instance for this data source if is valid. Format Mode sflow poller { | interval } Interface Config Field Description Receiver Index Poll Interval Enter the sFlow Receiver associated with the sampler/poller. A value of zero (0) means that no receiver is configured. The range is 1-8. The default is 0. Enter the sFlow instance polling interval. A poll interval of zero (0) disables counter sampling. When set to zero (0), all the poller parameters are set to their corresponding default value. The range is 0-86400. The default is 0. A value of N means once in N seconds a counter sample is generated. no sflow poller Use this command to reset the sFlow poller instance to the default settings. Utility Commands v1.0, November 2010 6-85