Netgear XSM7224S XMS7224S CLI Manual - Page 61

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 no spanning-tree mst instance This command removes a multiple spanning tree instance from the switch and reallocates all VLANs allocated to the deleted instance to the common and internal spanning tree. The parameter is a number that corresponds to the desired existing multiple spanning tree instance to be removed. Format Mode no spanning-tree mst instance Global Config spanning-tree mst priority This command sets the bridge priority for a specific multiple spanning tree instance. The parameter is a number that corresponds to the desired existing multiple spanning tree instance. The priority value is a number within a range of 0 to 61440 in increments of 4096. If you specify 0 (defined as the default CIST ID) as the , this command sets the Bridge Priority parameter to a new value for the common and internal spanning tree. The bridge priority value is a number within a range of 0 to 61440. The twelve least significant bits are masked according to the 802.1s specification. This causes the priority to be rounded down to the next lower valid priority. Default Format Mode 32768 spanning-tree mst priority Global Config no spanning-tree mst priority This command sets the bridge priority for a specific multiple spanning tree instance to the default value. The parameter is a number that corresponds to the desired existing multiple spanning tree instance. If 0 (defined as the default CIST ID) is passed as the , this command sets the Bridge Priority parameter for the common and internal spanning tree to the default value. Format Mode no spanning-tree mst priority Global Config Switching Commands v1.0, November 2010 3-20