Netgear XSM7224S XMS7224S CLI Manual - Page 68

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Term Definition Designated Root The Identifier of the designated root for this port. Root Path Cost The path cost to get to the root bridge for this instance. The root path cost is zero if the bridge is the root bridge for that instance. Designated Bridge Bridge Identifier of the bridge with the Designated Port. Designated Port Port on the Designated Bridge that offers the lowest cost to the LAN. Identifier Loop Inconsistent State The current loop inconsistent state of this port in this MST instance. When in loop inconsistent state, the port has failed to receive BPDUs while configured with loop guard enabled. Loop inconsistent state maintains the port in a "blocking" state until a subsequent BPDU is received. Transitions Into The number of times this interface has transitioned into loop inconsistent state. Loop Inconsistent State Transitions Out of Loop Inconsistent State The number of times this interface has transitioned out of loop inconsistent state. If you specify 0 (defined as the default CIST ID) as the , this command displays the settings and parameters for a specific switch port within the common and internal spanning tree. The is the desired switch port. In this case, the following are displayed. Term Definition Port Identifier The port identifier for this port within the CST. Port Priority The priority of the port within the CST. Port Forwarding The forwarding state of the port within the CST. State Port Role The role of the specified interface within the CST. Auto-Calculate Indicates whether auto calculation for port path cost is enabled or not (disabled). Port Path Cost Port Path Cost The configured path cost for the specified interface. Auto-Calculate Indicates whether auto calculation for external port path cost is enabled. External Port Path Cost Switching Commands v1.0, November 2010 3-27