Netgear XSM7224S XMS7224S CLI Manual - Page 327

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 boot autoinstall auto-save This command is used to enable automatically saving the downloaded configuration on the switch. . Default Format Mode Disabled boot autoinstall auto-save Privileged EXEC no boot autoinstall auto-save This command is used to disable automatically saving the downloaded configuration on the switch. Format Mode no boot autoinstall auto-save Privileged EXEC boot autoinstall start The command is used to start Auto Install on the switch. Auto Install tries to download a config file from a TFTP server. Format Mode boot autoinstall start Privileged EXEC boot autoinstall stop The command is used to A user may terminate the Auto Install process at any time prior to the downloading of the config file. This is most optimally done when the switch is disconnected from the network, or if the requisite configuration files have not been configured on TFTP servers. Termination of the Auto Install process ends further periodic requests for a host-specific file. Format Mode boot autoinstall stop Privileged EXEC Utility Commands 6-3 v1.0, November 2010