Netgear XSM7224S XMS7224S CLI Manual - Page 80

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 no vlan protocol group This command removes a protocol group. Format Mode no vlan protocol group Global Config vlan protocol group name This command assigns a name to a protocol-based VLAN groups. The groupname variable can be a character string of 0 to 16 characters. Format Mode vlan protocol group name Global Config no vlan protocol group name This command removes the name from a protocol-based VLAN groups. Format Mode no vlan protocol group name Global Config vlan protocol group add protocol This command adds the protocol to the protocol-based VLAN identified by groupid. Agroup may have more than one protocol associated with it. Each interface and protocolcombination can only be associated with one group. If adding a protocol to a group causes any conflicts with interfaces currently associated with the group, this command fails and the protocol is not added to the group. The possible values for protocol-list includes the keywords ip, arp, and ipx and hexadecimal or decimal values ranging from 0x0600 (1536) to 0xFFFF (65535). The protocol list can accept up to 16 protocols separated by a comma. Default Format Mode none vlan protocol group add protocol ethertype {|arp|ip|ipx} Global Config Switching Commands v1.0, November 2010 3-39