Netgear XSM7224S XMS7224S CLI Manual - Page 38

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 show checkpoint statistics This command displays the statistics for the checkpointing process. Format Mode show checkpoint statistics Privileged EXEC Example: (Switch)#show checkpoint statistics Messages Checkpointed 6708 Bytes Checkpointed 894305 Time Since Counters Cleared 3d 01:05:09 Checkpoint Message Rate 0.025 msg/sec Last 10-second Message Rate 0 msg/sec Highest 10-second Message Rate............8 msg/sec clear checkpoint statistics This command clears the statistics for the checkpointing process. Format Mode clear checkpoint statistics Privileged EXEC Stack Firmware Synchronization Commands Stack firmware synchronization provides an automatic mechanism to synchronize the firmware on stack members whose firmware version differs from the version running on the stack manager. This operation can result in either an upgrade or downgrade of firmware on the mismatched stack member. However, this operation does not attempt to synchronize the stack to the latest firmware in the stack. During firmware transfer and upgrade, operations such as code download and move management can result in undesirable behavior, such as firmware corruption on a code mismatched stack member. As a result, you receive an error if you try to access the following operations from the user interface during stack firmware synchronization: • Move management • Unit renumbering • Code download Stacking Commands v1.0, November 2010 2-14