Netgear XSM7224S XMS7224S CLI Manual - Page 158

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Note: This is a stand-alone "no" command. This command does not have a "normal" form. Default Format Mode enabled no monitor Global Config show monitor session This command displays the Port monitoring information for a particular mirroring session. Note: The parameter is an integer value used to identify the session. In the current version of the software, the parameter is always one (1) Format Mode show monitor session Privileged EXEC Term Session ID Admin Mode Probe Port Mirrored Port Type Definition An integer value used to identify the session. Its value can be anything between 1 and the maximum number of mirroring sessions allowed on the platform. Indicates whether the Port Mirroring feature is enabled or disabled for the session identified with . The possible values are Enabled and Disabled. Probe port (destination port) for the session identified with . If probe port is not set then this field is blank. The port, which is configured as mirrored port (source port) for the session identified with . If no source port is configured for the session then this field is blank. Direction in which source port configured for port mirroring.Types are tx for transmitted packets and rx for receiving packets. Switching Commands v1.0, November 2010 3-117