Netgear XSM7224S XMS7224S CLI Manual - Page 508

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Table 8-18: User_Manager Log Messages Component Message User_Manager User Login Failed for XXXX User_Manager Access level for user XXXX could not be determined. Setting to READ_ONLY. User_Manager Could not migrate config file XXXX from version YYYY to ZZZZ. Using defaults. Cause Failed to authenticate user login. XXXX indicates the username to be authenticated. Invalid access level specified for the user. The access level is set to READ_ONLY. XXXX indicates the username. Failed to migrate the config file. XXXX is the config file name. YYYY is the old version number and ZZZZ is the new version number. Switching Table 8-19: Protected Ports Log Messages Component Message Cause Protected Ports Protected Port: failed to save configuration This appears when the protected port configuration cannot be saved Protected Ports protectedPortCnfgrInitPhase1Process: This appears when Unable to create r/w lock for protectedPort protectedPortCfgRWLock Fails Protected Ports protectedPortCnfgrInitPhase2Process: This appears when nimRegisterIntfChange Unable to register for VLAN change callback with VLAN fails Protected Ports Cannot add intIfNum xxx to group yyy This appears when an interface could not be added to a particular group. Protected Ports unable to set protected port group This appears when a dtl call fails to add interface mask at the driver level Protected Ports Cannot delete intIfNum xxx from group yyy This appears when a dtl call to delete an interface from a group fails Protected Ports Cannot update group YYY after deleting interface XXX This message appears when an update group for a interface deletion fails Protected Ports Received an interface change callback while This appears when an interface change call not ready to receive it back has come before the protected port component is ready. Log Messages v1.0, November 2010 8-10