Netgear XSM7224S XMS7224S CLI Manual - Page 452

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 no passwords aging Use this command to set the password aging to the default value. Format Mode no passwords aging Global Config passwords lock-out Use this command to strengthen the security of the switch by locking user accounts that have failed login due to wrong passwords. When a lockout count is configured, a user that is logged in must enter the correct password within that count. Otherwise the user will be locked out from further switch access. Only a user with read/write access can re-activate a locked user account. Password lockout does not apply to logins from the serial console. The valid range is 1-5. The default is 0, or no lockout count enforced. Format Mode Default passwords lock-out Global Config 0 no passwords lock-out Use this command to set the password lock-out count to the default value. Format Mode no passwords lock-out Global Config passwords strength-check Use this command to enable the password strength feature. It is used to verify the strength of a password during configuration. Format Mode Default passwords strength-check Global Config Disable Management Commands v1.0, November 2010 7-36