Netgear XSM7224S XMS7224S CLI Manual - Page 66

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Term Bridge Priority Bridge Identifier Bridge Max Age Bridge Max Hops Bridge Hello Time Bridge Forward Delay Bridge Hold Time Definition Configured value. The bridge identifier for the selected MST instance. It is made up using the bridge priority and the base MAC address of the bridge. Configured value. Bridge max-hops count for the device. Configured value. Configured value. Minimum time between transmission of Configuration Bridge Protocol Data Units (BPDUs). show spanning-tree interface This command displays the settings and parameters for a specific switch port within the common and internal spanning tree. The is the desired switch port. The following details are displayed on execution of the command. Format Mode show spanning-tree interface • Privileged EXEC • User EXEC Term Definition Hello Time Port Mode BPDU Guard Effect Root Guard Loop Guard TCN Guard BPDU Filter Mode BPDU Flood Mode Auto Edge Port Up Time Since Counters Last Cleared Admin hello time for this port. Enabled or disabled. Enabled or disabled. Enabled or disabled. Enabled or disabled. Enable or disable the propagation of received topology change notifications and topology changes to other ports. Enabled or disabled. Enabled or disabled. To enable or disable the feature that causes a port that has not seen a BPDU for 'edge delay' time, to become an edge port and transition to forwarding faster. Time since port was reset, displayed in days, hours, minutes, and seconds. Switching Commands v1.0, November 2010 3-25