Netgear XSM7224S XMS7224S CLI Manual - Page 282

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 show classofservice ip-dscp-mapping This command displays the current IP DSCP mapping to internal traffic classes for the global configuration settings. Format Mode show classofservice ip-dscp-mapping Privileged EXEC The following information is repeated for each user priority. Term IP DSCP Traffic Class Definition The IP DSCP value. The traffic class internal queue identifier to which the IP DSCP value is mapped. show classofservice trust This command displays the current trust mode setting for a specific interface. The parameter is optional and is only valid on platforms that support independent per-port class of service mappings. If you specify an interface, the command displays the port trust mode of the interface. If you do not specify an interface, the command displays the most recent global configuration settings. Format Mode show classofservice trust [] Privileged EXEC Term Definition Non-IP Traffic The traffic class used for non-IP traffic. This is only displayed when the COS trust mode is Class set to trust IP Precedence or IP DSCP (on platforms that support IP DSCP). Untrusted Traffic The traffic class used for all untrusted traffic. This is only displayed when the COS trust Class mode is set to 'untrusted'. Quality of Service (QoS) Commands 5-8 v1.0, November 2010