Netgear XSM7224S XMS7224S CLI Manual - Page 478

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Field dnsname 0-65535 servername Description The DNS name of the server. The port number to use to connect to the specified RADIUS server. The alias name to identify the server. no radius server host The no version of this command deletes the configured server entry from the list of configured RADIUS servers. If the RADIUS authenticating server being removed is the active server in the servers that are identified by the same server name, then the RADIUS client selects another server for making RADIUS transactions. If the 'auth' token is used, the previously configured RADIUS authentication server is removed from the configuration. Similarly, if the 'acct' token is used, the previously configured RADIUS accounting server is removed from the configuration. The parameter must match the IP address or dns name of the previously configured RADIUS authentication / accounting server. Format Mode no radius server host {auth | acct} {} Global Config The following shows an example of the command. (Switch) (Config) #radius server host acct 192.168.37.60 (Switch) (Config) #radius server host acct 192.168.37.60 port 1813 (Switch) (Config) #radius server host auth 192.168.37.60 name Network1_RADIUS_Auth_Server port 1813 (Switch) (Config) #radius server host acct 192.168.37.60 name Network2_RADIUS_Auth_Server (Switch) (Config) #no radius server host acct 192.168.37.60 radius server key This command configures the key to be used in RADIUS client communication with the specified server. Depending on whether the 'auth' or 'acct' token is used, the shared secret is configured for the RADIUS authentication or RADIUS accounting server. The IP address or hostname provided must match a previously configured server. When this command is executed, the secret is prompted. Management Commands v1.0, November 2010 7-62