Nikon MSV-01 User Manual - Page 22
Inserting a Memory Card
UPC - 018208253050
View all Nikon MSV-01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Basic Operation-Inserting a Memory Card Basic Operation Inserting a Memory Card To copy image data from a memory card to the MSV-01 or from the MSV-01 to a memory card, insert a CompactFlash™ memory card into the memory card slot. 1 Turn the MSV-01 off Confirm that the monitor is off and the power-on lamp is off or, if the AC adapter is connected, is lit or flashing orange ( 10). 2 Open the memory card slot cover Gently slide the memory card slot cover downwards to expose the memory card slot. Terminals Front Direction of insertion 3 Insert a memory card Insert a memory card into the memory card slot in the direction shown on the illustration. Insert the memory card firmly, but without excess force. (When correctly inserted, a CompactFlash™ memory card protrudes approximately 12 mm from the MSV-01 main unit.) Inserting Memory Cards 12mm • Insert the memory card terminals first. Inserting the card upside down or backwards could damage the MSV-01 or the card. Check to be sure that the card is in the correct orientation. • Perform all operations on a table or any other stable flat surface to avoid dropping the MSV-01 or memory cards. Removing Memory Cards Memory cards can be removed without loss of data when the MSV-01 is off. To remove a memory card, turn the MSV-01 off and confirm that the power-on lamp is off or, if the AC adapter is connected, is lit or flashing orange. Then grasp the protruding section of the memory card, and pull it out. Note that memory cards may become hot during use. Observe due caution when removing memory cards from the MSV-01. Supported Memory Cards The memory card slot accepts CompactFlash™ memory cards (Type I and II). On memory cards approved for use with the COOLWALKER MSV-01 see "Approved Memory Cards" ( 57). 12