Nikon MSV-01 User Manual - Page 53

Before Starting Direct Printing • Check if your printer supports direct printing via direct USB connection (PictBridge). • Before beginning direct printing, confirm your printer settings. For information on setting the printer, refer to your printer documentation. Power Supply Source When printing via direct USB connection, use the provided DSA-0151-05 AC adapter to maintain continuous stable power supply. If using the battery pack, make sure it is sufficiently charged. Connecting and Disconnecting the USB Cable • Do not connect the USB cable until "Connect to printer" is displayed on the monitor. • Disconnect the USB cable only when "Disconnect printer" is displayed on the monitor after you have pressed DONE (Left button) in the direct print menu. If an Error Message is Displayed If an error message is displayed during printing ( 63), check your printer connection and settings. After solving the problem that caused the error, press CONT. (Right button) to resume printing. To abort printing, press CANCEL (Left button). Printing Images Stored on the MSV-01 1 2 Advanced Operation-Printing Via Direct USB Connection (PictBridge) Highlight Print images in HDD from the direct print menu ( 42) using or . 3 Press to display the list view. Select a folder containing images for printing. • Use or to highlight a folder. • Use to display a list of sub-folders inside the selected folder. Use to close the list view of sub-folders. • To return to Step 1, press CANCEL (Left button). 4 Press to go to the SELECT PRINT IMAGES screen. Use or to scroll through thumbnails of images shown in the top section of the monitor. The currently selected image is shown in the lower section of the monitor. • To return to Step 2, press LIST (Left button). Press (+) to select the current image for printing. • The set number of prints is displayed on the selected images. 43