Oki MPS2731mc MC362w/MC562w/MPS2731mc Advanced User Guide (English) - Page 111
Admin Setup, Network > TCP/IP, Enable, Submit, View Info, Network > IEEE802.1X, IEEE802.1X,
View all Oki MPS2731mc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
ENABLING IPV6 1. Access the machine's web page and log in as the administrator. 2. Select Admin Setup. 3. Select Network > TCP/IP. 4. Select Enable for IPv6. 5. Click Submit. The network system reboots to enable the new settings. CHECKING IPV6 ADDRESS The IPv6 address is automatically assigned. 1. Select View Info. 2. Select Network > TCP/IP. NOTE When the global address is displayed with only "0", it may be an error due to the router you use. You can also check the IPv6 address in the network report from the machine by pressing the SETTING key and then selecting Reports > System > Network Information. USING IEEE802.1X Your machine supports the IEEE802.1X authentication. Be sure to set up your machine and computer in advance before performing the following procedure. NOTE For details on the initial setup and the IP address, refer to "Configuring the network settings" on page 9. CONFIGURING YOUR MACHINE FOR IEEE802.1X Using PEAP 1. Access the machine's web page and log in as the administrator. 2. Select Admin Setup. 3. Select Network > IEEE802.1X. 4. Select Enable for IEEE802.1X. 5. Select PEAP for EAP Type. 6. Enter a user name in EAP User. 7. Enter a password in EAP Password. 8. Select Authenticate Server and then click Import. 9. Enter the file name of the CA certificate and then click OK. Specify the certificate issued by the certificate authority from which the RADIUS server got it. A PEM, DER, and PKCS#7 file can be imported. Advanced network settings > 111