Oki MPS2731mc MC362w/MC562w/MPS2731mc Advanced User Guide (English) - Page 134
target. If ON, the MFP
View all Oki MPS2731mc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
ITEM Fax Setupa (cont.) OPTION Security Function ID Check Tx Broadcast Destination Confirm Dial Other Settings Redial Tries Redial Interval Ring Response Dialling Pause Duration Rx Reduc. Rate Reduc. Margin ECM Mode Prefix Received Time Stamp Print Check Message VALUE/DESCRIPTION ON, OFF ON, OFF ON, OFF 0 ~ 2 ~ 9 time(s) 1 ~ 5 minute(s) 1 Ring, 5 seconds, 10 seconds, 15 seconds, 20 seconds 0 ~ 2 ~ 10 second(s) Auto, 100% 0 ~ 24 ~ 100 mm ON, OFF user defined ON, OFF ON, OFF Check and match the last four digits of the destination fax numbers with those registered in the target. If ON, the MFP will send only when they match. Fax number confirmation screen displays before sending the fax. When ON, you will be asked to re-enter the destination fax number. The fax will only be sent when the two numbers match. Set the number of redial attempts. Range: 0 - 9 time(s) Set the time between redial attempts. Range: 1 - 5 minute(s) Enter the number of rings required before receiving an incoming fax. Enter the pause duration required. Range: 0 - 10 second(s) Select the Rx reduction rate. Select the reduction margin. Range: 0 - 100 mm Error correction mode (ECM) automatically detects and corrects errors in the fax transmission process that are sometimes caused by telephone line noise. Enter the require dialling prefix (if you are connected via a PBX then you need to enter a prefix to obtain an outside line connection). Set to ON if you want the time stamp printed on incoming faxes. If enabled, when a transmission error occurs the error content is reported. Appendix A - menu system > 134