Oki MPS2731mc MC362w/MC562w/MPS2731mc Advanced User Guide (English) - Page 20
Disable, When WEP is selected, When WPA-PSK or WPA2-PSK is selected
View all Oki MPS2731mc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
11. Depending on the security setting selected in step 8, execute the settings from either (1) or (2) below. If Disable is selected, proceed to step 10. (For security reasons, we do not recommend setting Disable.) (1) When WEP is selected: a) Press the on the WEP KEY input screen. MEMO Nothing is set by default. If the WEP KEY is already set, it is displayed using "*" symbols. When the OK button is pressed, the screen switches to the screen in step 10 without switching to the screen in step b). If the right button is pressed to switch to the screen in step b) when a WEP KEY is set, the set KEY is cleared. NOTE There is not setting for the WEP KEY index. The WEP KEY index communications with the wireless AP as 1. b) Enter the same KEY as the WEP KEY set for the wireless AP that you want to connect to. After entering the WEP KEY, move the cursor to the Done field and press OK. MEMO After entering the KEY, the key is displayed as "*" symbols for security reasons. (2) When WPA-PSK or WPA2-PSK is selected: a) Press the to select the encryption type, and then press OK. Configuring the network settings > 20