Olympus 5050 C-5050 Zoom Reference Manual (11 MB) - Page 113

Sequential shooting There are 4 sequential shooting modes: high speed sequential shooting, sequential shooting, AF sequential shooting and auto bracketing. Sequential shooting modes can be selected from the DRIVE mode menu. Sequential shooting cannot be performed when the record mode is set to TIFF. Drive mode Shoots 1 frame at a time when the shutter button is pressed. (Normal shooting mode, single-frame shooting) Pictures can be taken at a faster speed than normal sequential shooting. The sequential shooting speed varies depending on the record mode setting. 4 frames at 3.3 frames/sec. (3 frames in SHQ ENLARGE SIZE mode) Focus, exposure and white balance are locked at the first frame. Approx. 11 frames at 1.7 frames/sec. (in HQ mode) Focus is individually locked for each frame. The AF sequential shooting speed is slower than for normal sequential shooting. BKT "Auto bracketing" (P.113) High speed sequential shooting, sequential shooting and AF sequential shooting 6 Mode dial 1 In the top menu, select MODE MENU → CAMERA → DRIVE → , or , and press . "How to use the menus" (P.70) • Press again to exit the menu. Advanced shooting 2 Take the picture. • Press the shutter button fully and keep it pressed. The camera will take pictures in sequence until you release the button. • You are recommended to use the viewfinder for sequential shooting. During sequential shooting, the subject does not appear on the monitor. 112 SEt CARD PIC CAMERA Arrow pad OK button DRIVE ISO MY MODE FLASH SLOW HI AF BKt