Olympus 5050 C-5050 Zoom Reference Manual (11 MB) - Page 193
Video output selection
UPC - 050332138223
View all Olympus 5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Video output selection You can select NTSC or PAL according to your TV's video signal type. Select the video signal type before shooting. If you use the wrong video signal type, you will not be able to play back the recorded pictures properly on your TV. Mode dial 1 In the top menu, select MODE MENU → SETUP → VIDEO OUT → NTSC or PAL, and press . "How to use the menus" (P.70) • Press again to exit the menu. • The factory default setting varies depending on the area where you purchased this camera. Arrow pad OK button TIPS TV video signal types & main regions Check the video signal type before using the camera. NTSC : Japan, Taiwan, Korea, North America PAL : European countries, China 9 Useful functions 192
192
9
Useful functions
Video output selection
You can select NTSC or PAL according to your TV’s video signal type. Select
the video signal type before shooting. If you use the wrong video signal type,
you will not be able to play back the recorded pictures properly on your TV.
1
In the top menu, select MODE
MENU
→
SETUP
→
VIDEO OUT
→
NTSC or PAL, and press
.
“How to use the menus” (P.70)
• Press
again to exit the menu.
•
The factory default setting varies
depending on the area where you
purchased this camera.
TIPS
TV video signal types & main regions
Check the video signal type before using the camera.
NTSC
:
Japan, Taiwan, Korea, North America
PAL
:
European countries, China
Mode
dial
Arrow pad
OK button