Olympus 5050 C-5050 Zoom Reference Manual (11 MB) - Page 91
Using a slave flash mode, In the top menu, select MODE, CAMERA, FLASH, SLAVE, and press, Press
UPC - 050332138223
View all Olympus 5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
External flash (optional) Using a slave flash mode This setting is for using a commercially available slave flash. This lets you adjust and fix the amount of light emitted by the commercially available slave flash. If you set a low amount, the flash will fire during sequential shooting. The following restrictions apply to the slave flash mode depending on the selected flash mode. : The setting is changed to AUTO. SLOW : The setting is changed to SLOW 1. Mode dial 1 In the top menu, select MODE MENU → CAMERA → FLASH → SLAVE, and press . "How to use the menus" (P.70) 5 Flash 2 Press to select the amount of light from 1 to 10, then press . Arrow pad OK button 90
90
External flash (optional)
5
Flash
Using a slave flash mode
This setting is for using a commercially available slave flash.
This lets you adjust and fix the amount of light emitted by the commercially
available slave flash. If you set a low amount, the flash will fire during
sequential shooting. The following restrictions apply to the slave flash mode
depending on the selected flash mode.
: The setting is changed to AUTO.
SLOW : The setting is changed to
SLOW 1.
1
In the top menu, select MODE
MENU
→
CAMERA
→
FLASH
→
SLAVE, and press
.
“How to use the menus” (P.70)
2
Press
to select the amount
of light from 1 to 10, then press
.
Mode
dial
Arrow pad
OK button