Olympus 5050 C-5050 Zoom Reference Manual (11 MB) - Page 38

Setting the date and time 6 Press to select one of the following date formats: Y-M-D (Year/Month/Day), M-D-Y (Month/ Day/Year), D-M-Y (Day/Month/Year). Y MD Then press . • Move to the year setting. SELECt SEt GO • The following steps show the procedure used when the date and time settings are 1 set to Y-M-D. Getting started 7 Press to set the year, then press to move to the month setting. • To move back to the previous setting, press . The first two digits of the year are fixed. 8 Repeat this procedure until the date and time are completely set. SELECt SEt GO 9 Press . • For a more accurate setting, press when the time signal hits 00 seconds. The clock starts when you press the button. 10 To turn the camera off, set the power switch to OFF. Power switch • The current settings are retained even when the power is turned off, unless they are readjusted. Note • The date and time settings will be canceled if the camera is left without batteries for approximately 1 hour. The settings will be canceled more quickly if the batteries were only loaded in the camera for a short time before being removed. Before taking important pictures, check that the date and time settings are correct. 37