Olympus 5050 C-5050 Zoom Reference Manual (11 MB) - Page 59
Erasing pictures (Single-frame erase
UPC - 050332138223
View all Olympus 5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Erasing pictures (Single-frame erase) This function erases only the picture displayed on the monitor. The all-frame erase function can be used to erase all the pictures on the card at once. "All-frame erase" (P.163) • You cannot erase pictures that are protected or stored on a write- protected SmartMedia card. Cancel protection or remove the write- Note protect seal before erasing such pictures. • Once erased, pictures cannot be restored. Check each picture before erasing to avoid accidentally erasing pictures you want to keep. "Protecting pictures" (P.57) 2 • Pictures protected (read only) by the PC are also erased. To prevent erasure, the pictures have to be protected on the camera. "Protecting pictures" (P.57) Shooting and playback basics Mode dial 1 Set the mode dial to and turn the camera on. "Power on/off" (P.31) Erase button Power switch Mode dial • The monitor turns on. 2 Use the arrow pad or jog dial to display the picture you want to erase. "Viewing still pictures" (P.53) Arrow pad 3 Press . • The ERASE screen is displayed. 4 Press to select YES, then press . • The picture is erased and the menu is closed. SELECt Jog dial ERASE YES NO GO 58