Olympus 5050 C-5050 Zoom Reference Manual (11 MB) - Page 49

Recording movies Even if the distance between the camera and the subject changes while you are recording a movie, the FULLTIME AF is set to on to maintain the correct focus and exposure (factory default setting). Mode dial 1 Set the mode dial to the camera on. "Power on/off" (P.31) and turn 2 • The monitor turns on and the available recording time on the card that you are using is displayed. Shutter button Mode dial 2 Decide the composition while looking at the image on the monitor. Power switch Shooting and playback basics 3 Press the shutter button fully to start recording. • The orange lamp on the right of the viewfinder lights. • During movie recording, lights red. Seconds remaining 4 Press the shutter button again to stop recording. • The card access lamp blinks while the movie is stored on the card. • When the remaining recording time has been used up, recording stops automatically. • When there is space in the card memory, the remaining recording time is displayed, and the camera is ready to shoot. 48