Olympus 5050 C-5050 Zoom Reference Manual (11 MB) - Page 211
The image quality is poor., The picture is too bright.
UPC - 050332138223
View all Olympus 5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Troubleshooting Erasing, protecting or rotating pictures, setting print reservation data, and formatting cards cannot be performed. Possible cause Corrective action Ref. Page A write-protect seal is attached to the SmartMedia card. Remove the seal before using the SmartMedia card. Do not reuse the writeprotect seal. P.25 The settings are returned to the factory default settings when the camera is turned off. Possible cause Corrective action Ref. Page All Reset is set to ON. Select the SETUP tab in the mode menu and set All Reset to OFF. P.164 No picture is displayed on the TV when connected to the camera. Possible cause Corrective action The video output signal is incorrect. Set the video output signal according to the region where used. The camera is not in the playback mode. Set the mode dial to . The TV video signal setting is Set the TV to the video input mode. incorrect. Ref. Page P.192 P.151 P.151 The image quality is poor. The picture is too bright. Possible cause The flash was set to the fill-in flash mode. The subject was excessively illuminated. Corrective action Select a flash mode other than fill-in flash. Adjust the exposure compensation toward minus (-) or change the camera position. Ref. Page P.79 P.131 11 Miscellaneous 210