Olympus 5050 C-5050 Zoom Reference Manual (11 MB) - Page 21

1 Getting started Attaching the strap 1 Pass the lens cap string through the hole in the lens cap, then pass the other end through the loop and pull tight. 1 2 Pull the ends of the strap out of the stopper and ring. Ring Stopper Getting started 3 Thread one end of the strap through the string loop (attached to the lens cap in step 1). Then thread it through the strap eyelet on the camera. 4 Thread the end of the strap back through the ring and stopper as indicated by the arrows. Adjust the strap to the desired length. 5 Pull the strap through the stopper ( ) to make sure it is fastened securely. 6 Attach the strap to the other eyelet following steps 3 to 5. Strap eyelet • Be careful with the strap when you carry the camera, as it can easily catch on stray objects, causing injury or damage. Note • Attach the strap correctly as shown above so that the camera does not fall off. If the strap is attached incorrectly and the camera falls off, Olympus is not responsible for any damages. 20