Pentax PZ-1 PZ-1 Manual - Page 102
Snolly1bd0, A33nvaciv
![]() |
View all Pentax PZ-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
(12) USING A PENTAX DEDICATED EXTERNAL FLASH If the built-in flash is not powerful enough, a Pentax dedicated external flash should be used. V4I Using the Flash in TTL Auto Mode 1. Remove the hot shoe cover and attach the Pentax dedicated flash. 2. Set the flash to the TTL Auto mode. Ensure the camera is in the Hyper Programmed, Programmed, or Aperture-Priority AE mode. 3. Turn on the flash. 4. Check that the flash charges. When the flash ready lamp lights up, can be seen in the viewfinder when the shutter release button is pressed halfway down. • After charging, a shutter speed within the range 1/250 to 1/30 second is automatically selected depending on the ambient brightness. The slowest shutter speed depends on the focal length of the lens (FA and F lenses only). 5. Focus on the subject and shoot. • In the Shutter-Priority AE or Hyper Manual mode, slowshutter-speed-sync photography is enabled (see page 83.1. SNOLLY1Bd0 a33NVACIV 96
![](/manual_guide/products/pentax-pz1-pz1-manual-0da1973/102.png)