Pentax PZ-1 PZ-1 Manual - Page 40
NOIldied0, 3ISVEI
View all Pentax PZ-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
(7) TAKING A PICTURE (8) USING THE BUILT-IN FLASH (RTF) 6o 8.0 Tv 15 Av LS 19101110011S) NOIldied0 3ISVEI When the shutter release button is pressed halfway down, the shutter speed and aperture setting are displayed in the viewfinder and on the LCD panel. To release the shutter, gently press the shutter release button fully down. The camera automatically winds the film and increments the exposure counter by 1. * If the mode dial is at Ilacm.1, the shutter will not release. For normal use, set the mode dial to another position. • If the subject is dark or backlighted, the flash recommendation indicator [i] 1 blinks, advising use of flash. (The I 1 indicator also blinks on the LCD panel.) • 34 When flash is recommended by the indicator use the built-in flash. [i] 1, The Flash Recommendation Indicator IV 1 In the Hyper Programmed, Programmed, or Aperture- Priority AE mode, the flash recommendation indicator [i) ] in the viewfinder and 1 on the LCD panel may blink if the shutter release button is pressed halfway. This indicator may also blink in the Shutter-Priority or Hyper Manual mode when the shutter release button is pressed halfway in backlit situation.