Philips DVDR600VR User manual - Page 73

E9480UD_EN.qx3 05.1.8 4:16 PM Page 73 DVD to Videotape Duplication 73 STANDBY-ON POWER ON STOP/EJECT PLAY 4 HEAD HI-FI STEREO ONE TOUCH RECORDING · LONG PLAY REW F.FWD RECORD CHANNEL IR DVD OPEN/CLOSE D.DUBBING SOURCE VCR DVD DVD RECORDER DVD+RW/+R RECORDING STOP PLAY RECORD PROGRESSIVE SCAN DV 3-4 Follow the steps below to copy a DVD to a videotape. This will be possible only if the DVD is not copy protected. Before you begin: ● Put a videotape in the cassette compartment. Make sure the tape's record tab is intact and the tape is long enough to record the DVD. Advance the tape to the point at which you want to start recording. ● Put the DVD you want to copy in the disc tray. Advance it to the point at which you want to start recording, then press STOP C. ● Press VCR so the VCR light appears on the front of the Recorder. ● Turn on the TV and set it to channel 3, 4, or its Video Input. 1 With the Recorder in VCR mode, press REC MODE until the desired tape speed (SP or SLP) appears briefly on the screen. Details about tape speed are on page 80. 2 Press DVD so the DVD light appears on the front of the Recorder. 3 Press D.DUBBING on the front of the Recorder. The unit will be in recording standby mode. REC will flash in the VCR display panel. Þ DVD VCR Dubbing STANDBY-ON OPEN/CLOSE 1 2 3 EJECT TV/VIDEO 4 5 6 7 8 VCR Plus +/TIMER 0 9 MONITOR CHANNEL VCR DISC MENU CLEAR DVD SYSTEM MENU 2 1 OK SELECT RETURN PLAY VCR REC STOP DVD REC MODE PLAY MODE AUDIO PAUSE REC FSS T/C DISPLAY SLOW VOLUME MUTE MODE TV SEARCH 5 4 Press D.DUBBING on the front of the Recorder again to start recording. The DVD will start playing automatically, and the tape counter will show recording progress in the VCR display panel. REC will appear on the VCR display panel. DVD➞VCR Dubbing 5 To stop recording, press VCR, then press STOP C. Helpful Hint • You cannot copy a DVD to a videotape if you are using Progressive Scan.