Pioneer AVIC N2 Owner's Manual - Page 103

NAVI/AV Chapter 9 Operating Your Navigation System with Voice Chapter 9 Operating Your Navigation System with Voice To Ensure Safe Driving 1 Touch VOICE icon to activate voice operation. • For safety reasons, Voice Help menu (Voice Recog.Help) is not available while your vehicle is in motion. To enable this function, you must stop in a safe place and put on the parking brake before setting your route. Basics of Voice Operation Your Pioneer Navigation System comes with the latest in voice recognition technology. You can use voice commands to operate many of its functions. This chapter describes where you can use voice commands, and also what commands the system accepts. ❒ In order to operate the navigation unit by voice, you need the microphone kit (CDVC1), which is sold separately. Please refer to the "Owner's Manual" for the microphone kit. ❒ Some voice commands cannot be used during the memory navi mode. Flow of voice operation You can start voice operation any time even when the map screen is displayed or audio is operated. The basic steps of voice operation are as follows. 2 Speak a command into the micro- phone. 3 When the command is recognized, it is repeated. 4 As necessary, repeat Steps 2 and 3. 5 The voice command is carried out. When using voice operation for the first time Until you are familiar with this system, it is recommended to stop the vehicle in a safe place and refer to the commands displayed in the Voice Help menu (a list of the words you can speak). When your vehicle is parked with the parking brake on, Touch VOICE icon to display a list of available voice commands (Voice Help menu). Display of the Voice Help menu can be turned on /off with "Voice Recog.Help" in the Settings menu. 101