Pioneer AVIC N2 Owner's Manual - Page 81

Chapter 7 AV Using the AV Source (Pioneer AV Equipments) M-CD Chapter 7 Using the AV Source (Pioneer AV Equipments) When Pioneer audio equipment is connected to the Navigation System using IP-BUS or AV-BUS, such equipment can be operated from the navigation unit. This chapter describes the operation of the audio source that can be used when the Pioneer audio equipment is connected. When reading this chapter, please also refer to the operation manual of the AV equipment connected to the Navigation System. Multi-CD Player Listening a CD (1) (2) (3) (4) (5) You can use navigation unit to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. ➲ More advanced M-CD operation ➞ Page 80 ❒ Pressing the DISP button changes the screen display. ➲ Switching screen display ➞ Page 98 (1) Source icon Shows which source has been selected. (2) Disc number indicator Shows the disc currently playing. (3) Track number indicator Shows the track currently playing. (4) Play time indicator Shows the elapsed playing time of the current track. (5) Disc list display Shows the disc title list. 1 Touch the source icon and then touch "M- CD" to select the multi-CD player. 2 Touch the screen to display the touch panel keys. 3 Touch any of 01 - 06 to select a disc you want to listen to. If you want to select a disc located at 7 to 12, touch or to display 07 - 12. When 01 - 06 and 07 - 12 are not displayed, you can display them by touching "DISP". You can also sequentially select a disc by touching or or moving the joystick up or down. 4 To skip back or forward to another track, touch or . Touching skips to the start of the next track. Touching once skips to the start of the current track. Touching again will skip to the previous track. You can also skip back or forward to another track by moving the joystick left or right. 5 To perform fast forward or reverse, keep touching or . You can also perform fast reverse/fast forward by holding the joystick left or right. ❒ When the multi-CD player has performed the preparatory operations, READY is displayed. ❒ If the multi-CD player does not operate properly, an error message such as ERROR-11 may be displayed. Refer to the multi-CD player owner's manual. ❒ If there are no discs in the multi-CD player magazine, NO DISC is displayed. 50-disc multi-CD player Only those functions described in this manual are supported for 50-disc multi-CD players. (But this unit can perform the disc list display up to Disc 12 with a 50-disc multi-CD player.) 79