Pioneer AVIC N2 Owner's Manual - Page 97

AV 1 Touch "REAR SP" in the INITIAL menu. 2 Touch "REAR SP" to switch the rear out- put setting. When no subwoofer is connected to the rear output, select FULL. When a subwoofer is connected to the rear output, select SUB. W. ❒ When the rear output setting is SUB. W, you cannot change the subwoofer controller. 3 Touch "PREOUT" to switch the sub- woofer output or non fading output. ❒ Even if you change this setting, there is no output unless you turn "NON FADING" or "SUB WOOFER" in the AUDIO menu "ON". ➲ Using non fading output ➞ Page 91 ➲ Using subwoofer output ➞ Page 91 ❒ If you change the subwoofer controller (REAR SP), the subwoofer output (SUB WOOFER) and non fading output (NON FADING) in the AUDIO menu return to the factory settings. ❒ Both rear speaker leads output and RCA rear output are switched simultaneously in this setting. Switching the sound muting/ attenuation Sound from this system is muted, attenuated or mixed automatically in the following cases: • When a call is made or received using a cellu- lar telephone connected to navigation unit. • When the voice guidance is output. 1 Touch "TEL/GUIDE" in the INITIAL menu. Each touch of the "TEL/GUIDE" changes the settings as follows: • MUTE- Muting • ATT - Attenuation • NORMAL - Volume does not change ❒ The sound is turned off, no audio adjust- ment is possible. ❒ When a phone connection is made, MUTE or ATT is indicated. ❒ Operation returns to normal when the phone connection or the voice guidance is ended. ❒ Even when you receive a phone call, navigation voice guidance cannot be attenuated or muted. Use the Hardware Volume to control the navigation voice guidance volume. Switching the automatic disc playback You can turn automatic disc playback on or off when you insert a disc into the disc loading slot. When this function is on, the disc will be automatically played after it is inserted into the disc loading slot. Initially, this function is set to OFF. 1 Touch "DISC AUTO" in the INITIAL menu. Touching "DISC AUTO" switches between "ON" and "OFF". Switching the dimmer setting for sub-display To prevent the sub-display from being too bright at night, the sub-display is automatically dimmed when the vehicle's headlights are turned on. You can turn dimmer on or off. 1 Touch "SUB. D. DIM" in the INITIAL menu. Touching "SUB. D. DIM" switches between "ON" and "OFF". ❒ Initially, this function is set to OFF. Changing the voice output of the navigation guidance When there is a navigation guidance, you can mix the guidance voice/beep sound from a navigation with the audio sound from this system. You can select the speaker output the navigation guidance. 1 Touch "GUIDE VOICE" in the INITIAL menu. Each touch of the "GUIDE VOICE" changes the settings as follows: Initial Settings Chapter 8 Customizing the Audio Source Setting 95