Pioneer AVIC N2 Owner's Manual - Page 80

AV Advanced radio operation ❒ You can also use and to recall radio station frequencies assigned to preset tuning keys P1 - P6. Using the AV Source (Built-in DVD Drive and Radio) Chapter 6 RADIO (1) (1) Function display Shows the function names. ➲ How to display the FUNCTION menu ➞ Page 69 Storing and recalling broadcast frequencies If you touch any of the preset tuning keys P1 (PRESET 1) - P6 (PRESET 6) you can easily store up to six broadcast frequencies for later recall with the touch of a key. Preset tuning keys (P1 - P6) 1 When you find a frequency that you want to store in memory keep touching a preset tuning key P1 - P6 until the preset number (e.g., P.ch: 1) stops flashing. The number you have touched will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. 2 The next time you touch the same preset tuning key P1 - P6 the radio station frequency is recalled from memory. When the touch panel keys are not displayed, you can display them by touching the screen. When P1 - P6 are not displayed, you can display them by touching DISP. ❒ Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory. 78 Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Touch "LOCAL" in the FUNCTION menu. 2 Touch "ON" to turn local seek tuning on. To turn local seek tuning off, touch "LOCAL". 3 Touch or to set the sensitivity. There are four levels of sensitivity for FM and two levels for AM: FM: 1 - 2 - 3 - 4 AM: 1 - 2 The 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. Storing the strongest broadcast frequencies BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning keys P1 - P6 and once stored there you can tune in to those frequencies with the touch of a key. 1 Touch "BSM" in the FUNCTION menu. 2 Touch "START" to turn BSM on. BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under preset tuning keys P1 - P6 in order of their signal strength. When finished, BSM stops flashing. To cancel the storage process, touch STOP. ❒ Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using P1 - P6.