Pioneer AVIC N2 Owner's Manual - Page 85
Switching the XM display, Storing and recalling broadcast, stations, Switching the XM channel,
UPC - 012562735191
View all Pioneer AVIC N2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
AV XM Chapter 7 Using the AV Source (Pioneer AV Equipments) 1 Touch the source icon and then touch "XM" to select the XM. 2 Touch the screen to display the touch panel keys. 3 Touch "BAND" to select a XM band. Touch "BAND" repeatedly until the desired XM band is displayed, XM1, XM2 or XM3. 4 To perform tuning, touch or . The channels move up or down step by step. Channels that cannot currently be selected are skipped, and the next channel is selected. If you keep touching or , you can increase or decrease channel number continuously. You can also perform manual tuning by moving the joystick left or right. You can also perform tuning from a desired channel category. ➲ Selecting the channel in the channel cate- gory ➞ Page 83 Switching the XM display ➲ Switching screen display ➞ Page 98 Storing and recalling broadcast stations If you touch any of the preset tuning keys P1 - P6 you can easily store up to six broadcast stations for later recall with the touch of a key. 1 When you find a station that you want to store in memory keep touching a preset tuning key P1 - P6 until the XM preset number (e.g., P.ch: 1) stops flashing. The number you have touched will flash in the XM preset number indicator and then remain lit. The selected station has been stored in memory. The next time you touch the same preset tuning key P1 - P6 the station is recalled from memory. When the touch panel keys are not displayed, you can display them by touching the screen. When P1 - P6 are not displayed, you can display them by touching ➞. ❒ Up to 18 stations, 6 for each of three XM bands can be stored in memory. ❒ You can also use and to recall stations assigned to preset tuning keys P1 - P6. Switching the XM channel select setting You can switch if you select a channel with a channel number or from a channel category when you select a channel. 1 Touch "MODE" to select the desired channel select setting. 2 Touch "MODE" repeatedly to switch between the following channel select settings: CH NUMBER (channel number select setting) - CATEGORY (channel category select setting) Selecting the channel in the channel category 1 Touch "MODE" to select the channel cat- egory select setting. 2 Touch "MODE" repeatedly to switch between the following channel select settings: CH NUMBER (channel number select setting) - CATEGORY (channel category select setting) 3 Touch or to select the desired chan- nel category. 4 Touch or to select the desired chan- nel in the selected channel category. Selecting the XM channel directly You can select the XM channel directly by entering the desired channel number. 1 Touch "DIRECT". CHANNEL INPUT appears in the display. 2 Touch 0 - 9 to input the desired channel number. To cancel the input numbers, touch "CLEAR". 83