Pioneer SC-05 Owner's Manual - Page 104
Controlling the rest of your system, Resetting the remote control presets, Confirming preset codes,
![]() |
UPC - 012562891521
View all Pioneer SC-05 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
14 Controlling the rest of your system 5 Repeat step 4 to erase other buttons. 6 Press and hold MULTI OPERATION for a couple of seconds when you're done. Resetting the remote control presets This will erase all preset remote control preset codes and programmed buttons.1 1 While pressing MULTI OPERATION, press HOME MENU. The remote LCD display shows SETUP. 2 Use / to select RESET, then press ENTER. RESET flashes in the LCD display. 3 Press and hold ENTER for about two seconds. The LCD shows OK to confirm the remote presets have been erased. Confirming preset codes Use this feature to check which preset code is assigned to an input source button. 1 While pressing MULTI OPERATION, press HOME MENU. The remote LCD display shows SETUP. 2 Use / to select READ ID, then press ENTER. The LCD on the remote prompts you for the input source button you want to check. 3 Press the button of the component for which you want to check the preset code, then press ENTER. The brand name and preset code appears in the display for three seconds. Renaming input source names You can customize the names that appear on the remote LCD when you select an input source (for example, you could change the name of DVR 1 to HDD/DVR). 1 While pressing MULTI OPERATION, press HOME MENU. The remote LCD display shows SETUP. 2 Use / to select RENAME, then press ENTER. The LCD on the remote prompts you for the button of the input source you want to rename. 3 Press the input source button you want to rename then press ENTER. 4 Use / to select NAME EDT, then press ENTER. To reset the button to its original (default) name, select NAME RST above. 5 Edit the name of the input source in the remote control LCD, pressing ENTER when you're finished. Use / to change the character and / to move forward/back a position. The name can be up to eight characters (the possible characters are listed below). ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789 \ / * + - [space] Direct function • Default setting: ON You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component. This could let you, for example, use the remote control to set up and listen to a CD on the receiver, and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player. When direct function is on, any component you select (using the input source buttons) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote control without affecting the receiver. 1 While pressing MULTI OPERATION, press HOME MENU. The remote LCD display shows SETUP. 2 Use / to select DIRECT F, then press ENTER. The LCD on the remote prompts you for the button of the input source you want to control. 3 Press the input source button for the component you want to control, then press ENTER. 4 Use / to switch direct function ON or OFF, then press ENTER. The LCD shows OK to confirm the setting. 104 En Note 1 When Selecting preset codes directly on page 102 are set, all the signals learned in the input source buttons are cleared. This function is convenient when you want to reset some but not all of input source buttons.
![](/manual_guide/products/pioneer-sc05-owners-manual-6780f50/104.png)