Ricoh 5100N Quick Installation Guide - Page 132

Network Printer Card, System requirements, Connecting the Network Printer Card

Page 132 highlights

English Network Printer Card System requirements The following software and hardware are required to configure a printer for network applications. Software requirements Refer to the table in "Supported network environments" on page 1. NOTE: Your printer may not support all of the listed computing environments (operating systems). Therefore, check the network environment your printer supports in the user's guide that came with the printer. Hardware requirements Hardware PC Requirements • 80486 CPU or higher • Minimum of 16 MB of RAM • 2 MB of free disk space Macintosh • PowerPC 68020 or higher • Minimum of 8 MB of RAM • 2 MB of free disk space Connecting the Network Printer Card 1 Use a twisted-pair cable with an RJ-45 connector to connect the printer to your network. 2 Once a connection is established between the wired network printer card and your network, the link LEDs on the card light. Activity LED: Blinks when data packets are being transferred. Link LED: Lights when the printer card is connected to the network. 3 Set up your printer's IP address. See "IP address setup" on page 4. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178

2
English
Network Printer Card
System requirements
The following software and hardware are required to configure a printer for
network applications.
Software requirements
Refer to the table in “Supported network environments” on page 1.
N
OTE
: Your printer may not support all of the listed computing environments
(operating systems). Therefore, check the network environment your printer
supports in the user's guide that came with the printer.
Hardware requirements
Connecting the Network Printer Card
1
Use a twisted-pair cable with an RJ-45 connector to connect the printer to
your network.
2
Once a connection is established between the wired network printer card
and your network, the link LEDs on the card light.
3
Set up your printer's IP address. See “IP address setup” on page 4.
Hardware
Requirements
PC
80486 CPU or higher
Minimum of 16 MB of RAM
2 MB of free disk space
Macintosh
PowerPC 68020 or higher
Minimum of 8 MB of RAM
2 MB of free disk space
Link LED: Lights when the
printer card is connected to
the network.
Activity LED: Blinks when data
packets are being transferred.