Ricoh 5100N Quick Installation Guide - Page 18

2. Layout menu Use the 2. Layout menu to define all settings relating to output. Item Orientation Explanation Values: Portrait, Landscape Choose the default orientation of the print image on the page. Simplex Margin Portrait Landscape Values: Top Margin: 0, Left Margin: 0 Set the margin of print meterials for one-sided printing. You can increase or decrease the value in 0.1 mm increments. • Top Margin: Set the top margin, from 0 to 9.9 mm. • Left Margin: Set the left margin, from 0 to 6.5 mm. Item Duplex Explanation Values: Off, Long Edge, Short Edge To print on both sides of paper, choose the binding edge as follows. • Long Edge: Flip on the long edge. • Short Edge: Flip on the short edge. 2 3 2 5 Long Edge in the Portrait orientation 2 3 5 Long Edge in the Landscape orientation Duplex Margin 3 2 5 3 5 Short Edge in the Portrait orientation Short Edge in the Landscape orientation Select Off to print on one side of the paper. Note • This menu item is available when the optional duplex unit is installed. Values: Top Margin/ Left Margin: 5.0, Short Binding/ Long Binding: 0 In this menu, you can set the margins for doublesided printing. You can increase or decrease the value in 0.1 mm increments. • Top Margin: Set the top margin, from 0.0 to 9.9 mm. • Left Margin: Set the left margin, from 0.0 to 9.9 mm. • Short Binding: Set the bottom margin of the back of the page for short binding, from 0 to 22 mm. • Long Binding: Set the right margin of the back of the page for long binding, from 0 to 22 mm. Note • This menu item is available when the optional duplex unit is installed. 2.3