Ricoh AP610N Setup Guide - Page 65
Configuration
UPC - 026649023385
View all Ricoh AP610N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
5. Configuration Ethernet Configuration Make the following network settings according to the network interface you are using. You can use SmartDeviceMonitor for Admin or a Web browser to make IP address-related settings in a TCP/IPcapable environment. Important ❒ Configure the printer for the network using the control panel. ❒ The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu. Setting Name DHCP IP Address Subnet Mask Gateway Address Frame Type (NW) Active Protocol Ethernet Speed LAN Type Value On 011.022.033.044 000.000.000.000 000.000.000.000 Auto TCP/IP Active NetWare Active SMB Active AppleTalk Active Auto Ethernet Note ❒ If DHCP is in use, "IP Address", "Subnet Mask", and "Gateway Address" are all set automatically. ❒ Make this setting only when it is necessary. See Software Guide. A Press the {Menu} key. AGN503S The [Menu] screen appears on the display. B Press the {U} or {T} key to dis- play [Host Interface] menu, and then press the {# Enter} key. Menu: Host Interface The interface setting menu appears. C Press the {U} or {T} key to dis- play [Network Setup], and then press the {# Enter} key. The network setup menu appears. D Press the {U} or {T} key to dis- play [Active Protocol], and then press the {# Enter} key. 61