Ricoh Aficio MP 3350B Operating Instructions - Page 1068

6. Various Scan Settings Scan settings on the custom size setting screen BAP043S 1. Original Size (X1 and Y1) Specify the original's entire size. 6 Enter the actual values in [X1] and [Y1] while referring to "How to measure sizes", and then press the [ ] key. 2. Start Position (X2 and Y2) Specify the scanning start position. Enter the actual values in [X2] and [Y2] while referring to "How to measure sizes", and then press the [ ] key. 3. Scan Area (X3 and Y3) Specify sizes of the area you want to scan. Enter the actual values in [X3] and [Y3] while referring to "How to measure sizes", and then press the [ ] key. • When scanning originals using [Custom Size], you cannot enter specific values in [Original Size] and [Start Position]. To configure the scan area, specify [Scan Size] and [Start Position] first, and then [Original Size]. How to set originals to scan them by custom size This section explains how to place originals you want to scan at Custom size. Original Orientation setting Under [Original Orientation], select [ ] or [ ] according to the orientation of your original. To display [Original Orientation], on the initial scanner screen, press [Original Orientation]. For details, see "Setting of Original Feed Type". Placing an original Place originals face up in the ADF; face down on the exposure glass. 128