Ricoh Aficio MP 3350B Operating Instructions - Page 121

When You Have Problems Operating the Machine Problem Cause Solution Misfeeds occur frequently. There is a foreign object on • Remove the misfed paper. See the finisher tray. p.117 "Removing Jammed Paper". 1 • Do not place anything on the finisher tray. It may cause a paper jam. Misfeeds occur frequently. The staple cartridge is not set correctly. Set the staple cartridge properly. The booklet finisher requires the saddle stitch staple cartridge also. For details about how to add staples, see p.111 "Adding Staples". Cannot print in duplex mode. Duplex printing cannot be done with paper set in the bypass tray. When using duplex printing, make settings to use paper from a tray other than the bypass tray. Cannot print in duplex mode. [Apply Duplex] is set to [No] In [Tray Paper Settings], under "Paper for "Paper Type". Type", set [Apply Duplex] to [Yes]. Cannot print in duplex mode. You cannot select duplex printing if the paper type is set to [OHP], [Thin Paper], [Label Paper], or [Thick Paper]. In [Tray Paper Settings], under "Paper Type", select a paper type other than [OHP], [Thin Paper], [Label Paper], or [Thick Paper]. • If you cannot make copies as you want because of paper type, paper size, or paper capacity problems, use recommended paper. See "Recommended Paper Sizes and Types", About This Machine. • Using curled paper often causes misfeeds, soiled paper edges, or slipped positions while performing staple or stack printing. When using curled paper, take the stiffness out of the paper with your hands to straighten out the curl, or load the paper up side down. Also, to prevent paper from curling, lay paper on a flat surface, and do not lean it against the wall. 17