Ricoh Aficio MP 3350B Operating Instructions - Page 152

3. Troubleshooting When Using the Facsimile Function Problem Cause lit, low paper may have caused printing to stop. Solution For details about Substitute Reception, see "Substitute Reception", Facsimile Reference. The machine failed to print In [Facsimile Features], under Print the fax documents using a Web received fax documents. [Reception Settings], [Store] browser or the Print Stored RX File has been selected for function. See "Printing Received and [Reception File Setting]. Stored Documents" and "Viewing, 3 Printing, and Deleting Received Fax Documents Using a Web Image Monitor", Facsimile Reference. The machine failed to print received fax documents. Load Paper indicator is lit. Load paper into the tray. See p.97 "Loading Paper". Transmission is possible, but The terminal adaptor setting is Check the setting. reception is impossible. incorrect. While pressing [Manual Email RX], "Cannot receive Emails currently." appears and e-mail cannot be received. The machine is receiving an ondemand e-mail message (e-mail inquiry from the administrator). After the e-mail is received, press [Manual E-mail RX], and then try again. Problem Print is slanted. Print is slanted. Print is slanted. Misfeeds occur frequently. Printing Cause Solution The tray's side fences might Check the side fences are locked. See not be locked. p.102 "Changing the Paper Size". The paper is fed at a slant. Load the paper correctly. See p.97 "Loading Paper". The cover of the machine is Check the cover is closed properly. open. The number of feeding in the paper tray exceeds the capacity of the machine. • When loading paper into the paper tray, load paper only as high as the upper limit markings on the side fences of the paper. • When loading paper on the bypass tray, load only as much paper as can be held between the guides on the bypass tray. 48