Ricoh Aficio MP 3350B Operating Instructions - Page 134

2. Troubleshooting When Using the Copy/Document Server Function Problem Stamp Cause Solution The stamp position is wrong. The paper orientation is wrong. Check the paper orientation and stamp position. 2 The stamp is not printed on the The back side stamp position Reset the back side stamp position. For back side of sheets when is incorrect for the paper size. details about Duplex Back Page duplex copying. Stamping Position, see "Copier/ Document Server Features", General Settings Guide. Problem Combine Cause Solution Copies made with the You selected a setting "Booklet" or "Magazine" ("Open to Left" or "Open to function cannot be folded into Right") that does not match a book correctly. the orientation of originals. In [Copier / Document Server Features], under [Edit], set [Orientation: Booklet, Magazine] properly. When using "Combine", parts of the image are not copied. You specified a reproduction ratio that does not match the sizes of your originals and copy paper. When you specify a reproduction ratio using Manual Paper Select mode, make sure the ratio matches your originals and the copy paper. Select the correct reproduction ratio before using Combine mode. See "One-Sided Combine", "Two-Sided Combine", or "Auto Reduce/Enlarge", Copy/ Document Server Reference. Copies are not in correct order. You placed the originals in the incorrect order. When placing a stack of originals in the ADF, the last page should be on the bottom. If you place an original on the exposure glass, start with the first page to be copied. Problem Duplex Cause Cannot print in duplex mode. You have loaded paper on the bypass tray. Solution Remove paper loaded on the bypass tray. Load paper in a tray other than bypass tray. 30