Ricoh Aficio MP 3350B Operating Instructions - Page 772

7. Appendix Function name Program / Change / Delete Standard Message Backup File TX Setting Description causes problems, you can make settings to limit the size of sent e-mail. Program standard messages to be printed at the top of the first page of the original of the opposite party. You can specify whether or not to send to a selected folder the backup of a file sent by Memory Transmission. Function name Reception Settings Description Switch Reception Mode Specify the method for receiving fax documents. Program Special Sender By programming particular receivers as Special Sender in advance, you can have Special Senders treated differently. Program Special Sender: Print List You can print the Special Sender List. Forwarding 7 Reception File Setting Specify whether or not received fax documents are to be forwarded to a programmed receiver. Select whether received documents are saved on the hard disk to be printed later or printed immediately without being saved. Stored Reception File User Setting The administrator can be specified for managing documents stored on the machine after fax documents are received. SMTP RX File Delivery Settings This function is available on systems that allow routing of email received via SMTP. 2 Sided Print Specify whether or not received fax documents are to be printed on both sides of the paper. Checkered Mark Specify whether or not a checkered mark is to be printed on the first page of received fax documents. Center Mark Specify whether or not a center mark is to be printed halfway down the left side and at the top center of each page received. Print Reception Time Specify whether or not the received date, time, and file number are printed at the bottom of received fax documents. 320