Ricoh Aficio MP 3350B Operating Instructions - Page 154

3. Troubleshooting When Using the Facsimile Function Problem Cause Solution Received image is too light. When using moist, rough, or processed paper, areas of print may not be fully reproduced. Use recommended paper. See "Recommended Paper Sizes and Types", About This Machine. Received image is too light. When is blinking, toner is Add toner. See p.107 "Adding beginning to run out. Toner". 3 Received image is too light. The image density has been Increase the scanning density. For set too low. details about how to change the density, see "Density (Contrast)", Facsimile Reference. Received image is too light. The original of the transmitted Ask the sender to reprint the original on fax was printed on paper that thicker paper and fax it again. is too thin. Problem Others Cause Solution All fax documents stored in memory have been lost. Those documents include ones stored through Memory Transmission/Reception, Memory Lock, or Substitute Reception. When about one hour passes after power to the machine is turned off, all fax documents stored in memory are lost. If any documents have been lost for this reason, a Power Failure Report is automatically printed when the machine is turned on. If fax documents stored for Memory Transmission have been lost, check the destinations and resend the documents. If fax documents received through Memory, Memory Lock or Substitute Reception have been lost, ask the senders to resend the documents. See p.53 "Turning Off the Main Power / In the Event of Power Failure". When a correct password is entered, you cannot print documents that appear in the Personal box or Information box, or transmit / print out stored documents. Documents are locked by a security function if incorrect passwords are entered a certain number of times. Contact the administrator. 50