Ricoh Aficio MP 3350B Operating Instructions - Page 502

1. Transmission Acceptable Original Sizes This section describes the size and thickness limitations that apply to originals placed on the exposure glass 1 or the ADF. Where original is set Acceptable original size Maximum number of sheets Paper thickness Exposure glass Up to A3 (297 × 420 mm), 11 × 17 (279 × 432 mm) 1 sheet ADF, one-sided original A5 to A3 51/2 × 81/2 (up to 1200 mm long) to 11 × 17 50 sheets (81.4 g/m2, 21 lb) 40-128 g/m2 (11-34 lb) (64-105 g/m2 (17-28 lb) for 11 × 17 ) ADF, two-sided original A5 to A3 (up to 432 mm long) 51/2 × 81/2 to 11 × 17 50 sheets (81.4 g/m2, 21 lb) 52-105 g/m2 (14-28 lb) (64-105 g/m2 (17-28 lb) for 11 × 17 ) • The weight range for originals in the Mixed Original Sizes mode is 52- 81 g/m2, 13.8-21.5 lb. Paper Size and Scanned Area This section explains the size of the area the machine can scan and detect. • There may be a difference in the size of the image when it is printed at the destination. • Even if an original is correctly placed on the exposure glass or in the ADF, a margin of 3 mm (0.1 inch) around each edge of the original may not be sent. • If the receiver uses paper of a smaller width than the original, the image is reduced to fit that paper. See "Auto Reduce". • p.169 "Auto Reduce" When placing an original on the exposure glass This section explains how to place an original on the exposure glass. 50