Ricoh Aficio MP 3350B Operating Instructions - Page 177

Other Printing Problems Other Printing Problems This section describes likely causes of and possible solutions for problems that can occur when printing from a computer. Problem When you cannot print clearly Cause Solution The printed image is smudged. Settings for thick paper have PCL 5e/6 not been made when printing On the [Paper] tab, select [Bypass on thick paper in the bypass Tray] in the [Input Tray:] list, and tray. then select [Thick] in the [Type:] list. RPCS 4 On the [Setup] tab, select [Bypass Tray] in the [Paper source tray:] list, and then select [Thick] in the [Paper type:] list. The printed image is faded over the entire page. When is blinking, toner is Add toner. See p.107 "Adding beginning to run out. Toner". The printed image is faded over the entire page. The paper is damp. Use paper that has been stored in the recommended temperature and humidity condition. See "Paper Storage", About This Machine. The printed image is faded over the entire page. The paper is unsuitable. Use recommended paper. Printing on coarse or treated paper might result in faint print image. See "Recommended Paper Sizes and Types", About This Machine. The printed image is faded over the entire page. If the [Toner saving] is selected in the printer driver settings, the entire page will be faded when printed. On the RPCS printer driver's [Print Quality] tab, in the [Document type] area, select the document type other than [Toner saving]. Images smudge when rubbed. (Toner is not fixed.) The specified paper type and the paper that is actually loaded might be different. For example, thick paper might be loaded but not specified as the paper type. PCL 5e/6 On the [Paper] tab, select a proper paper type in the [Type:] list. 73