Ricoh Aficio SP 3510DN Manuals - Page 46
Specifying an IP Address for IPv4 (No DHCP), IP Ad. DHCP: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX
View all Ricoh Aficio SP 3510DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4. Configuration Setting Name IPv6 Config. Value • IPv6: On • DHCP: Off • IP Ad. (DHCP): XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX *1 If the DHCP setting is enabled, the IPv6 address obtained from a DHCP server is displayed. • Manual Address: • Manual Address: 0000:0000:0000 • Prefix Length: (0-128) 0 • Gateway Address: 0000:0000:0000: • Stateless Ad.: • Address 1: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX *1 • Address 2: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX *1 • Address 3: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX *1 • Address 4: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX *1 • Link-local Ad.: XXXX: XXXX: XXXX: XXXX: XXXX *1 *1 "X" indicates a unique address number for your printer. • If [DHCP] is in use, the IP address, subnet mask, and gateway address are all set automatically. • Each printer has a unique [MAC Address] value. • Set the Ethernet speed if necessary. Specifying an IP Address for IPv4 (No DHCP) Use the following procedure to assign a specific IP address to the printer with IPv4 protocol. This procedure is only necessary if you want to use the printer on a network without DHCP, or want to prevent the printer's IP address from changing. Before beginning this procedure, make sure you have the IP address, subnet mask, and gateway address that the printer will use. 44