Ricoh Aficio SP 3510DN Manuals - Page 48
Receiving an IP Address for IPv4 Automatically (DHCP), Gateway Address
View all Ricoh Aficio SP 3510DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4. Configuration Press the [ ] or [ ] key to enter the left most entry field of the address. After entering the left field, press the [OK] key, and then you can enter the next field. After completing to enter in the all field, press the [OK] key. 9. Use this method to assign Subnet Mask and Gateway Address. 10. Press the [Menu] key. 11. If you are requested to restart the printer, turn off the printer, and then turn it back on. 12. Print a configuration page to confirm the settings made. • For details about printing the configuration page using control panel, see p.35 "Test Printing". Receiving an IP Address for IPv4 Automatically (DHCP) • When you use this printer protocol in the DHCP environment with IPv4 protocol, select [DHCP] following this procedure. • When [DHCP] is selected, you cannot make settings for the following items: • IP Address • Subnet Mask • Gateway Address • Consult your network administrator for information about making network settings. 1. Press the [Menu] key. CMC034 2. Press the [ ] or [ ] key to display [Host Interface], and then press the [OK] key. Menu: Host Interface 46