Ricoh CL3500N Maintenance Manual - Page 106

Appendix Moving and Transporting the Printer • When moving the machine, each person should hold the handles that are located on opposite sides, and then lift it slowly. Lifting it carelessly or dropping it may cause an injury. • When you move the printer, remember to unplug the power cord from the wall outlet to avoid a fire or an electric shock. • When you pull out the plug from the socket, grip the plug, not the cord, to avoid damaging the cord and causing a fire or an electric shock. • When moving the printer after use, do not take out any of the Toners, Photo Conductor Units, nor the waste toner bottle to prevent toner spill inside the machine. Repack the printer in its original packing materials for transporting. ❒ The printer weighs approximately 32 kg (70.5 lb.). ❒ Be sure to disconnect all cables from the printer before transporting it. ❒ The printer is a precision piece of machinery. Take care to avoid damage dur- ing shipment. ❒ If the optional paper feed unit is installed, remove it from the printer, and then move them separately. Moving the Printer • When lifting the machine, use the inset grips on both sides. Otherwise the printer could break or cause an injury if dropped. • Before moving the machine, unplug the power cord from the wall outlet. If the cord is unplugged abruptly, it could become damaged. Damaged plugs or cords can cause an electrical or fire hazard. Moving the printer in a short distance A Be sure to check the following points: • The power switch is turned off. • The power cable is unplugged from the wall outlet. • The interface cable is unplugged from the printer. B If the external options are installed, remove them. G1398504_1.00 Copyright © 2005 106