Ricoh CL3500N Maintenance Manual - Page 64
Calibrate 1, K:2 M:3 C/Y:3/3, K:2 M:2 C/Y:2/2, Save and exit, Exit don't save
UPC - 026649024344
View all Ricoh CL3500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Cleaning and Adjusting the Printer ❒ Each time the {U} or {T} key is pressed, the value increases or decreases respectively, in increments of 1. ❒ The correction value can be set between 0 and 6. G Press the {# Enter} key after setting the K (black) gradation. The cursor shifts to M (magenta). Calibrate 1: K:2 M:3 C/Y:3/3 H Set the gradation correction values for M (magenta), C (cyan), and Y (yel- low) using the same procedure as for the K (black). I If you finished all settings, ensure that the cursor is on the correction value for Y (yellow), and then press the {# Enter} key. Calibrate 1: K:2 M:2 C/Y:2/2 The example shows the display of the control panel when the correction value for each color is changed to 2. J Check [Yes] is displayed, and press the {# Enter} key to print the correc- tion result. K Check gradation correction sheet 1. To save the correction values, check [Save and exit] is displayed and press the {# Enter} key. If you do not want to save the correction values after this procedure, press the {U} or {T} key to display [Exit don't save], and then press the {# Enter} key. ❒ If you complete this procedure without saving the correction values, the changes will not be applied to subsequent print jobs. Calibrate 1: Save and exit Calibrate 1: Exit don't save This concludes the setting for correction 1. Next, proceed to correction 2. L Press the {T} key to display [Start Calibr. 2], and then press the {# Enter} key. 64